Input: 220-240V AC, 50Hz, 350mA
Output current: 1. 5A
Charging voltage:
Lead acid (normal): 7.3V/ 14 .4V DC
Cold/AGM: 7.4/14.7V DC
LiFePO4; 12 .8V/4 cells
1.5A 6V/ 12V 8 Steps Intelligent Battery Charger
With CC/CV Control for LiFePO4 & Lead Acid Battery of Wet, MF, VRLA, AGM & GEL
Input: 220-240V AC, 50Hz, 350mA
Output current: 1. 5A
Charging voltage:
Lead acid (normal): 7.3V/ 14 .4V DC
Cold/AGM: 7.4/14.7V DC
LiFePO4; 12 .8V/4 cells
Charging current:
6V lead acid: 1.5A
12V lead acid: 1 .5A
LiFePO4: 1.5A
Insulation: IP 65 (water & dust)
Dimension: 174x 65 x 46.5mm
Protection:
√ Short circuit protection
√ Overload protection
√ Wrong polarity protection
√ Reverse battery protection
√ Safety timer protection
Principle programme representation 6V/ 12V Pb
Principle programme representation LiFePO4
LED indication:
| Item | Indication | LED |
| LED | INDICATION | LED COLOR |
| Power On Reset | AlI LED flash 2 times for self-check. | Red Flashing |
| Stand-by | ON: no battery at Standby. OFF: Battery Charging. | Green |
| Error(dual color) | Flashing: 1.Timer for lead acid (red ) 2. Timer for Lithium (yellow flash) 3. Total timer (yellow flash) 4. Battery voltage (yellow) 5. Reversed polarity (red flash) | Red & yellow flashing |
| 25% | Flashing Steady OFF: full charged | Red flashing |
| 50% | Flashing Steady OFF: full charged | Orange flashing |
| 75% | Flashing Steady OFF: full charged | Yellow flashing |
| 100% | Flashing Steady: full charged | Green |
| 6V Normal | Mode selected | Red |
| 6V Cold/ AGM | Mode selected | Red |
| 12V Normal | Mode selected | Red |
| 12V Cold/ AGM | Mode selected | Red |
| Lithium | Mode selected | Red |
