Input: 220-240V AC, 50Hz, 0.6A
Output current: 4.0A
Charging voltage:
Lead acid (normal): 7.3/14.5V DC
Cold/AGM: 7. 4/14.7V DC
LiFePO4; 12.8V/4 cells
4.0A 6V/ 12V 8 Steps Intelligent Battery Charger
With CC/CV Control for LiFePO4 & Lead Acid Battery of Wet, Gel, MF & AGM
Input: 220-240V AC, 50Hz, 0.6A
Output current: 4.0A
Charging voltage:
Lead acid (normal): 7.3/14.5V DC
Cold/AGM: 7. 4/14.7V DC
LiFePO4; 12.8V/4 cells
Charging current:
6V lead acid: 4.0A (normal)
12V lead acid: 0.9 (small), 4.0A (normal)
LCD C
LiFePO4: 3.0A (normal)
Insulation:
IP 65 (water & dust)
Dimension: 211.3 x 84.4 x 49mm
Protection:
√ Short circuit protection
√ Overload protection
√ Wrong polarity protection
√ Reverse battery protection
√ Safety timer protection
Principle programme representation 6V/ 12V Pb
Principle programme representation LiFePO4
LED indication:
| Item | Indication | LCD indication |
| Power On Reset | LCD display flash twice for self- check. | Flashing |
 | Battery not connected | Flashing |
 | Error: 1. Timer 2hours at step 2 and step 3 ”Recovery+Soft" start charge. 2. If 12V recover (+) mode <12V after 4hours 3. Timer>15hours at Lithium Bulk charge. 4. Total Timer>40hours at Pb battery modes. 5. Battery voltage> 14V, Vbat= 1.0-2.0V | Flashing |
 | Connected in reverse polarity | Flashing |
 | Capacity of battery Flashing with different no. of bars, 5 bars means fully charged. Steady: Full charged after 3sec. | Flashing for charging; On for fully charged |
 | Mode selected: 6V Lead acid battery | On |
 and | Mode selected: cold mode 6V Lead acid battery | On |
 | Mode selected: 12V Lead acid battery (small capacity) | On |
 and | Mode selected: cold mode 12V Lead acid battery (small capacity) | On |
 | Mode selected: 12V Lead acid battery (regular capacity) | On |
 and | Mode selected: cold mode 12V Lead acid battery (regular capacity) | On |
LITHIUM 12.8V | Mode selected: Lithium iron phosphate battery | On |
| RECOVER 12V | Mode selected: Recover 12V Lead acid battery | On |
