13.6V Power Supply with CC/CV Control for LiFePO4 & Lead Acid Battery of
Wet, MF, AGM & GEL
Input: 220-240V AC, 50Hz, 1.3A
Output current: 7.5A
Charging voltage:
Lead acid (normal): 14 5/29.0V DC
Cold/AGM: 14.7/29.4V DC
LiFePO4; 12.8V/4 cells
Charging current:
12V lead acid: 7.5A
24V lead acid: 3.75A
LiFePO4: 5A
13.6V Power Supply: 5.0A
Insulation: IP 65 (water & dust)
Dimension: 251.3x 108.4 x 61.4mm
Protection:
√ Short circuit protection
√ Overload protection
√ Wrong polarity protection
√ Reverse battery protection
√ Safety timer protection
Principle programme representation 12V/ 24V Pb
Principle programme representation LiFePO4
LED indication:
| Item | Indication | LCD indication |
| Power On Reset | LCD display flash twice for self- check. | Flashing |
 | Battery not connected | Flashing |
 | Error: 1. Timer 2hours at step 2 and step 3 ”Recovery+Soft" start charge. 2. If 12V recover (+) mode <12V after 4hours 3. Timer>15hours at Lithium Bulk charge. 4. Total Timer>40hours at Pb battery modes. 5. Battery voltage> 14V, Vbat= 1.0-2.0V | Flashing |
 | Connected in reverse polarity | Flashing |
 | Capacity of battery Flashing with different no. of bars, 5 bars means fully charged. Steady: Full charged after 3sec. | Flashing for charging; On for fully charged |
 | Mode selected: 12V Lead acid battery (regular capacity) | On |
 and | Mode selected: cold mode 12V Lead acid battery (regular capacity) | On |
 | Mode selected: 24V Lead acid battery (small capacity) | On |
 and | Mode selected: cold mode 24V Lead acid battery (small capacity) | On |
| LITHIUM 12.8V | Mode selected: Lithium iron phosphate battery | On |
| RECOVER 12V | Mode selected: Recover 12V Lead acid battery | On |
| ADVA NCED AGM 12V | Mode selected: Advanced AGM battery | On |
| SMPS 13.6V | Mode selected: Power supply | On |
